You have received free shipping
Buy for 1.000,00 kr. more for free shipping
Subtotal: 0,00 kr.

What's new

How to update OTA firmware with FirmwareLoader Common


This guide describes how the PC application FirmwareLoader Common can be used to update firmware.
All Logic Group Z-Wave products can be updated via wireless .ota or .otz transfer.
To use the programme, a Z-Wave USB adapter compatible with Silicon Labs (formerly Sigma Designs and Zensys) UZB protocol is required.
This could be one of the following devices:

  • Aeon Labs USB Adapter (Z-Stick) GEN5
  • Z-WAVE.ME USB stick
  • Sigma Designs UZB USB Z-Wave Controller

DO NOT USE A USB ADAPTER USED BY A RUNNING CONTROLLER AS IT WILL BE RESET (DELETED)!

NB. When the device firmware is updated, it will be reset, i.e. its existing configuration and association to the Z-Wave network will be deleted. The device must subsequently be enrolled in the original network again.

Installing the programme

Download  [download id="2142″] and extract the zip file to a folder on your PC. This can be a temporary folder (e.g. TEMP folder), as the files can then be deleted when the programme is installed.
From the folder, run the setup.exe programme, then install the programme by following the on-screen instructions.
The installer will place the programme in the Windows start menu. The programme can be found again for later updates by searching for "Firmware loader common".

Using the programme

The Firmware Loader Common application guides the user through the different steps needed to transfer the firmware update to the device. Remember to download the desired .ota or .otz file.

Steps:

1

Select which COM port the USB device should sit on. Port 3 is selected here.

2

The device is identified by pressing the include button once or three times (see the manual for the applicable product). This will delete the device from its current network.

3

The device must be enrolled in the Firmware Loader Common application's network, so you need to press the include button again.

4

Now a firmware update with the file extension .ota or .otz must be selected from a local location. Remember to select the format in the drop-down menu.
Find firmware updates here.

5

Once a correct firmware update is selected, it will now be transferred to the device, which takes around 3 - 5 minutes.

Once the application is transferred, the device will automatically reset and is now ready.

6

You should now hold the inclusion button for about 10 seconds (until the LEDs flash briefly) to reset configuration parameters and delete it from the Firmware Loader Common application network.
If the transfer of the firmware to the device is interrupted for any reason, this will not cause any problems as the application is stored in an internal storage during the transfer. Only when the full application has been transferred and it has been verified that it has been transferred correctly (using a checksum) will it be written into the device's internal FLASH memory.

Do you need help?

If you need help with your Logic Group smart home, contact our electrician and smart home specialist

Direct email: nhy@logic-group.com


Contact us

NICKLAS HYLLEBERG+45 21 89 53 43

Book a showcasing

If you're thinking about making your home smart, book a smart home demonstration. Here you can get inspired and learn more about how you can make your home or future new build smart.

It only takes 45 minutes.

Sign up for our newsletter

By signing up for our newsletter, you will receive regular emails from us with news, information and good advice. As well as opportunities for great offers and discounts on the webshop.